IBS-HIP

HIP Series

SILICONE COATED
WIRE WOUND RESISTOR
INDUSTRIAL APPLICATIONS

PCB type termination which can be easily snapped on and wave soldered on the PCB.
Especially designed for use in B/W and colour Monitors.
R10 to 5K6

APPLICABLE STANDARDS -
EIA - RS - 155 - B, Char. G and JIS - C6401 Char. G.

Physical configuration

HTR TYPE	POWER RATING at 25°C	DIMENSIONS (mm)				RESISTANCE RANGE		WT. PER PC (gms)
HTR TYPE	POWER RATING at 25°C	L ±1.5	D ±0.5	P ±1.5	H ±1	MIN	MAX	WT. PER PC (gms)
H-3P	3W	20.0	6.5	12.5	18.5	R10	470R	2.6
H-5P	5W	25.0	8.5	15.0	22.5	R10	1K0	3.7
H-7P	7W	40.0	8.5	29.5	22.5	R10	2K7	5.6
H-10P	10W	54.0	8.5	43.0	22.5	R10	5K6	6.8

Electrical and Environmental Characteristics / Data

Test	Performance Requirements
Resistance tolerance	+ 10% [K]; ± 5% [J] and ±2%[G] [< 1ohm ± 0.05 ohms]
Rated ambient temperature [See derating curve]	at 25°C full power dissipation
Insulation resistance	>1000 M [Dry]
Temperature co-efficient	±200 ppm/°C [>10 Ohm] ±450 ppm/°C [<10 Ohm] ±600 ppm/°C [<1 Ohm]
Short time overload	Max D R± [2% +0.05Ohm]
Moisture Resistance	Max D R± [5% +0.05Ohm]
Load Life	Max D R± [5% +0.05Ohm]
Ambient operating temperature range	-40°C to +155°C

Return to the Products page.