Electrical and Environmental Characteristics / Data
Test
Performance Requirements
Resitance tolerance
± 10% [K]; ± 5% [J] <1 ohm ± 0.05 ohms
Rated ambient temperature (see derating curve)
at 70°C full power dissipation
Insulation resistance
> 1000 M[minimum]
Temperature co-efficient
± 80 to ±150ppm / °C
Short time overload
max D R ± 2% [+0.05 ohm]
Moisture resistance
max D R ± 5% [+0.05 ohm]
Load life
max D R ± 5% [+0.05 ohm]
Ambient Operating Temperature Range
-25°C to +155°C
TEMPERATURE RISE AT SOLDER JOINT (AT FULL POWER)
NOTE:
Type LV10 can be provided with 1.0mm leads if required, please specify
at the time of placing of the order.
NOTE:
Due to recent technological advances, the ceramic cases used may be
steatite ceramic/corderite ceramic/high alumina ceramic depending on the nature of
application. Hence the ceramic cases may be off-white/variations of brown and variations
of grey; colours which are inherent to these ceramic materials.
